Off Road Accessory

Blog Tags

Disc Brakes Bedding-in Procedure

Bedding-in procedure After installing your new set of Ironman 4x4 Ceramic Brake Pads, follow these simple steps: Find an open stretch of road that will allow you to safely stop your vehicle multiple times; Accelerate to 55 kph and apply moderate brake pressure to reduce your speed to 10-15kph (6-10mph); Repeat this process 3-4 times, the goal is to warm up your brake pads; Now increase your speed to 75kph (47mph) and braking down to 20kph (13mph); Repeat this process 3-4 times; Your bedding-in session is now complete. Park the car and allow the brakes to fully cool for an hour.

22/01/2025 07:53

Armored Vehicle / Heavy Duty Brake Pads and Discs

Armored Vehicle or Heavy Duty Brake Pads and Discs. If your vehicle is armored or heavily loaded with accessories, long braking distances are a very serious problem, you can stop your vehicle at much longer distances than normal, which increases your risk of accidents. Ironman has prepared a two-level program to solve the suspension problems of 4x4 loaded vehicles while also solving the brake problem, (stage 1) level 1 offers grooved performance brake disc and Kevlar ceramic brake pad instead of original brake disc and pad, while (stage 2) level 2 offers brand new brake caliper, brake disc and pad. You can choose from these according to your vehicle's load status and your wishes. Level 1 is currently available on the market, while level 2 will be available on the market in a few months (25/09/2024)

25/09/2024 08:56

Comfort Without Lift for the All-New Ford Ranger Wildtrak X Amarok

As you know, stiff suspension is a serious problem in pickup trucks, especially the rear parts bounce hard, this suspension problem is also valid for the Ford Ranger Wildtrak X, unfortunately, there is a solution to this stiffness that will turn you off from your vehicle. If you want SUV comfort without making an upgrade for the new generation brand new Ford Ranger Wildtrak, Wildtrak X and new Amarok, this is also available in Ironman 4x4 suspension options. If 12885GR and 12886GRC (Here the letter "C" is the first letter of the word Comfort) are used as front and rear Nitro-Gas shock absorbers respectively, A-Type FOR010A as the front coil and A-Type FOR012A as the rear leaf spring, the comfort of your vehicle will increase a lot, there will be a maximum of 10-15 mm increase at first, after a while, as the suspension system settles, it will drop to the standard height, and comfort will increase over time. Your vehicle will reach SUV comfort without increasing.

28/05/2024 11:29